Select Page

Out of the Box Manufacturing Adds Hybrid Rework System from Ersa

Kurtz Ersa Inc., a leading supplier of electronics production equipment, today announced that Out of the Box Manufacturing has purchased an HR 600/2 Hybrid Rework System. The system was installed at the company’s facility in Washington. 

 “We chose the Kurtz/Ersa HR 600/2 rework system due to it’s wide range of rework capabilities, and user friendly set up and interface, ” commented stated Jason Sweetser, OBMFG Test Supervisor, Out of the Box Manufacturing.  “Of course, the industry reputation of the Kurtz/Ersa name was a driving factor as well.” 

The HR 600/2 offers a highly accurate motor-driven axis system for component placement (+/- 0.025 mm) and highly efficient 800 W hybrid heating head. With the installation of the HR 600/2, Out of the Box benefits from guaranteed user independent reproducible repair results, as well as process control and documentation via the HRSoft operator software. 

As the name implies, Out of the Box Manufacturing takes a uniquely different approach to manufacturing by intelligently designing innovative and efficient processes that enable the company to build faster, better, and smarter than the competition. From fully automated systems to ISO-certified processes to paperless work instructions; the company’s expert engineering, program management, and production technicians ensure that assemblies are built right every time.

For more information about Out of the Box Manufacturing, visit 

For more information about Kurtz Ersa Inc., visit


Kurtz Ersa Inc. 

1779 Pilgrim Road | Plymouth, WI 53073 | USA | Phone: + 1 920 893 1779 | Fax: + 1 920 893 1562 | e-mail:  | Web: 

German Headquarters:

Ersa GmbH |Leonhard-Str. 24 |97877 Wertheim| Tel. +49 9342/800-0 |e-mail:| Web: 

Kurtz Ersa Mexico, S.A. DE C.V.

Felipe Angeles 52, Piso 2|Col. Bellavista|01140 Mexico, D.F. |R.F.C.:  KER-130507-857 | Phone:   + 52 (33) 15 93 18 63| e-mail: | Web: